The Great American Steamboat Race (20 page)

Cotton bales piled high on the decks of the steamer
William Garig
, docked at Baton Rouge. The bales were brought aboard the steamboats by roustabouts and were stacked by the boat’s deckhands under the direction of the boat’s first mate. Deckhands also stowed other freight, either in the boat’s hold or on deck, and retrieved it when the freight’s destination was reached (Library of Congress).

members during meals, not only by race but by the crewmen’s status in the steamboats’ work force. On the lower Mississippi, cabin passengers generally were served first, then, at separate sittings, the boats’ officers were served, then white servants and black passengers, then black crew members. Black passengers were not allowed to occupy staterooms and were restricted to the boats’ main deck. One contemporary account reports that the dining sequence was as follows: “the passengers, one set after another, and then the pilots, clerks, mates and engineers, and then the free colored people, and then the waiters, chambermaids, and passengers’ body servants.”
⁵

Crewmen not included in any of those groups ate as best they could from the leftovers of diners who had had their fill. One account reports that the feeding procedure was for the roustabouts, the lowest workers in the steamboat crews’ pecking order, to grab what they could from leftovers placed on the main deck in pans, meats in one, bread and cake in another and jellies and custards in a third. The low-status crewmen were summoned to their food with a cry of “Grub pile!” and after they had taken what they could, they would sit on the deck and eat.

Brawn was the main requisite for the roustabouts’ job, which required the roustabouts to strong-arm freight onto and off of the boats. Nimbleness was a big plus, because of the danger of slipping off narrow gangplanks while carrying freight aboard and ending up in the river, which sometimes resulted in roustabouts drowning. Once brought aboard by the roustabouts, the freight, including weighty, cumbersome bales of cotton, was stowed by the deckhands, either in the hold of the vessel or on deck, under the direction of the mate. Stacking cotton bales was an important part of the deckhands’ job, and until the 1840s, when the steam engine was adapted for hoisting the bales, it was done manually, using capstans to lift and precisely stack the bales. Deckhands also retrieved items of freight from stowage when they reached their destinations.

Deckhands were used, too, by the pilot to take soundings of the water’s depth and to call back to him the measurements. The depth was measured in fathoms, six feet to a fathom, using a thirty-foot rope that was dropped overboard and allowed to sink to the river bottom. One detailed account of the sounding procedure describes the rope as weighted with a twelve-inchlong pipe about an inch and a half in diameter, into which a length of chain was inserted and held in place with lead that was poured into the pipe. The end of the rope was tied to a link of the chain that extended from the pipe. Markers were affixed to the rope, called a “lead line,” to indicate the water’s depth as the weight sank into the river. Four feet from the end of the line was a piece of white flannel that was woven into the rope. At six feet from the end there was a piece of leather attached to the line, and at nine feet was a piece of red cloth. At twelve feet — mark twain — there was a piece of leather split into two thongs. At eighteen feet — mark three — there was a piece of leather split into three thongs, and at mark four there was a leather strip with a round hole in it. Those markers were readily identified even in darkness by the leadsman, the deckhand manning the lead line, and he called out the depth as the weight sank and the line slipped through his hands. When the leadsman called, “Mark twain!” he was telling the pilot that the water was two fathoms, or twelve feet, deep. “Quarter less three” meant the water was a quarter of a fathom less than three fathoms, or sixteen and a half feet, deep. “Half twain” meant the water was two and a half fathoms, or fifteen feet, deep. A depth shallower than a “quarter less twain” was measured in feet. A depth of more than “mark four”— twenty-four feet — was reported by the leadsman as “No bottom!” That was the call the pilot yearned to hear.

Measurements differed according to whether the weighted pipe lay horizontal on the river bottom or stood upright, with only its end touching the bottom. In some cases that difference could be critical. When the pipe rested horizontal on the bottom, the measurement was known as “laying lead.” When the pipe was vertical, it was called “standing lead.”

When a depth measurement was desired by the pilot, he would sound a whistle or bell, once for the measurement to be taken on the starboard side, twice for the larboard side. The soundings would be taken about every one hundred feet as the boat moved through the water. The leadsman, who ordinarily was some distance from the pilot standing atop the boat in the pilothouse, had to make certain he could be heard, even through the noise of wind and rain. To do so, leadsmen used chants when they called out the measurements, singing their own tunes and rhythms that they felt expressed the various depths of the river, always holding their notes to be sure their reports of the measurements were understood. On the Mississippi’s largest steamers the distance between the leadsman, down near the surface of the river, and the pilothouse was so great that the measurements were relayed from the leadsman to a deckhand posted closer to the pilothouse, who would then repeat the leadsman’s call. When the steamer was out of danger, having moved into deeper water, the pilot with a signal would end the soundings.

For times when the river was unusually low there was a more cautious procedure for sounding, which is detailed by Samuel Clemens in
Life on the Mississippi
. The boat would tie up to shore, he explains, and the pilot who was not on duty would take a hand-picked crew of deckhands and with them would leave the steamer, board its yawl — or a special sounding boat if the steamer was big and posh enough — and row out ahead of the steamer, searching for a channel that would allow the steamboat to get over the menacing sand bar that lay before them. At night, the yawl crewmen would find their way through the river’s blackness in the light of the yawl’s lantern. In the pilothouse the pilot on duty would watch the sounding crew’s movement through a telescope and by means of signals with the boat’s whistle would direct the sounding crew to test the water’s depth in one direction or another. When the yawl approached the shallow spot — the shoal place — the rowers would slow the yawl and the off-duty pilot would repeatedly measure the water’s depth with a pole ten or twelve feet long until he found the shallowest place. He would then order the yawl stopped and have the crew drop a buoy overboard.

At that, the yawl’s crewmen would stand their oars straight up to signal the pilot in the pilothouse, and he would give a blast of the boat’s whistle to acknowledge the yawl’s signal. “The steamer comes creeping carefully down,” Clemens relates, “is pointed straight for the buoy, husbands her power for the coming struggle, and presently, at the critical moment, turns on all her steam and goes grinding and wallowing over the buoy and sand and gains the deep water beyond.”
⁶
At night a paper lantern with a lighted candle in it was placed atop the buoy, its glow visible for a mile or more.

Or maybe the steamer doesn’t make it across the sandbar, Clemens conceded. In that case the steamer would rest there on the sandbar until its crew sparred it off, a procedure that tediously lifted the boat, with the aid of steam power, and shoved it ahead inches at a time, until the boat finally escaped the sandbar after many hours or even days.

Sometimes a buoy was not used, and instead of heading for the buoy, the steamboat would simply follow the yawl at a safe distance and at a cautious speed. Clemens claimed there was often a great deal of fun and excitement that went along with sounding in the yawl, particularly if done on a beautiful summer day. But in the winter, he said, the cold and the danger took most of the fun out of it.

Other responsibilities of the deckhands included manning the ropes to tie up and to cast off at landing sites, as well as keeping the main deck clean and pumping out water that had seeped into the hold. Individual deckhands also served as night watchmen, taking turns at patrolling the deck during the night, alert for fire or any other danger to the vessel. The typical Mississippi River steamboat would have forty or so deckhands in its crew.

Firemen, the crewmen who kept the furnaces fueled, were part of the deck crew. Most were negroes. The work was so physically demanding that many boat officers considered the fireman’s job to be for blacks only. One eyewitness described them at their labors. “The immense engine fires,” she wrote, “are all on deck, eight or nine apertures all in a row ... like yawning fiery throats, and beside each throat stood a negro naked to his middle, who flung in firewood. Pieces of wood were passed onward to these feeders by other negroes, who, standing on a lofty stack of firewood, threw down with vigorous arms food for the monsters on deck.”
⁷

It wasn’t only the stoking of the fires, moving four-foot-long logs from stacks on the deck and tossing them into the roaring furnaces, that made the job laborious; it was the hauling of wood onto the boats from riverside woodyards. Steamers burned six or more cords of wood a day, and the boats had to stop periodically to take on more fuel, often loading twenty or more cords onto the vessel each time it stopped for refueling. It was the firemen’s task to hand-carry the wood aboard, sometimes aided by deck passengers who had paid discounted fares on the condition that they would help with wooding, as the wood-toting task was called. The firemen and whatever helpers were assisting them would line up in a long queue and file off the boat on a gangplank, or landing stage, trudge up the levee and gather into their arms several of the four-foot logs, turn around and plod back down onto the boat and stack their burdens in piles near the furnaces, then go back, again and again, for more armloads until the wooding was completed. That work, of necessity, was carried on day or night, wintry or warm, dry or raining. Firemen were also required to clean out the furnaces and haul away the accumulated ashes. For their demanding work they received wages slightly higher than those paid other members of the deck crew. Around the middle of the nineteenth century deckhands and roustabouts were paid about thirty dollars a month, and firemen were paid about thirty-five dollars a month.

Over time, a faster system of taking on wood aboard the steamers was developed. It involved the use of a flatboat, or scow, loaded with twenty or more cords of wood, to be towed alongside the steamer and the wood transferred from the flatboat to the steamer while the two vessels moved upstream together. A contract for the wood would be made in advance of the fueling, the date and time of the steamer’s arrival being specified, and the flatboat would be waiting, day or night, for the steamboat, which would pause only long enough for the flatboat to be tied up to it. As the two vessels proceeded upriver, the steamer’s team of wood bearers would toss or carry the pieces of wood from the flatboat to the steamboat. The whole process, employing as many as forty men, would take about thirty minutes, the steamboat continuing its movement all the while, and when all the wood had been transferred to the steamboat, the towlines were cast off and the flatboat, manned by two crewmen of its own, would be allowed to drift downriver back to the wood yard with the current, the two crewmen guiding it with a long steering oar at each end of the craft. The distance it covered would usually be no more than five or six miles. Steamers paid a premium for the wood when such wood-boats were used. The system was seldom employed on downriver trips, for short of being towed, there was no way for the flatboats to return to their woodyards.

Cooks were another group of crewmen who worked on the main deck — and not under the best of conditions. George Byron Merrick in his recounting of steamboat operations on the upper Mississippi reports that there was a popular saying that if you wanted to save on the meals that a passenger was entitled to on his trip, you would take him through the kitchen the first thing after he came aboard. The implication being, Merrick pointed out, that after seeing the food in the process of preparation, passengers would have little appetite for it when it came to their tables. Merrick claimed it would be unfair to the average steamboat steward to accept the saying as wholly justified, but, he acknowledged, “it would be stretching the truth to assert that it was without foundation.” Steamboat kitchens in which meats and vegetables were prepared were cramped — usually measuring no more than ten by twenty feet — congested, messy and almost continually busy.

The cooks were required to turn out three meals a day for three to four hundred people, including passengers and crew, starting with an earlymorning breakfast for which preparations began at 3
A
.
M
. As soon as breakfast was over, the menu for dinner was written down by the steward and turned over to the chief cook, and efforts were begun to round up whatever was needed, often requiring time to take on provisions at the steamer’s next stop. Pigs, lambs and chickens were taken aboard live and slaughtered and dressed on the boat by assistant cooks. Chickens, taken from their coops, their necks wrung or broken on the iron rim of a barrel, were plunged into a barrelful of scalding water drawn from the steamer’s boilers and then had their feathers plucked from their steaming bodies before being eviscerated and their parts prepared for cooking, the process sometimes reaching a rate of a hundred and fifty chickens an hour, all done within the purview of the cooks and their bustling kitchens, reeking of many odors and aromas simultaneously.

On the other side of the boat was the bakers’ and pastry cooks’ kitchen, no bigger but far more inviting. It was, according to Merrick, the showplace of the boat. “Most stewards,” he wrote, perhaps revealing then popular tastes in food, “are shrewd enough to employ pastry cooks who are masters of their profession, men who take pride not only in the excellence of their bread, biscuit, and pie crust, but also in the spotlessness of their workshops. They are proud to receive visits from the lady passengers, who can appreciate not only the out-put but the appearance of the galley. It is a good advertisement for the boat, and the steward himself encourages such visits, while discouraging like calls at the opposite side.”
⁸